Skip to main content

Amplifier “classes” sound like grades — as if Class A were the best and everything else a compromise. They are nothing of the sort: they are different engineering answers to one stubborn problem, and knowing the trade-offs makes you a sharper buyer.

Vintage hi-fi separates on shelves beside a pile of records

The problem being solved

An output transistor is most linear — most faithful — when it is always conducting. It is most efficient when it only works as needed. Faithful runs hot and wastes power; efficient risks tiny handover errors as devices switch on and off. Every class is a different position on that see-saw.

Class A — purity with a radiator

Everything conducts all the time: gloriously linear, gloriously inefficient. Expect heat, weight and modest power — and, done well, a lovely sound. Rare now outside high-end designs and valve amplifiers, which operate on related principles.

Class A/B — the sensible workhorse

Devices share the work, overlapping slightly at the handover to dodge the errors. The overwhelming majority of amplifiers ever sold — including many superb ones in our listening room — are well-executed A/B.

Class D — the efficient modern

Switching designs reaching efficiencies over 90%, which is how tiny streaming amplifiers like the WiiM Amp make real power without a heatsink the size of a loaf. Long past its rough early reputation — today’s best Class D is genuinely good.

Class G — the clever compromise Arcam champions

Class G runs a conventional output stage from multiple power rails: low rails for everyday listening (cool, efficient), switching seamlessly to high rails when a crescendo demands current. You get A/B-style linearity with far less waste heat — which is why Arcam has made fifth-generation Class G the heart of its A25+, SA35 and SA45. Our Arcam range guide goes deeper.

Why the watts mislead

The class tells you how an amplifier makes its power; the number on the box tells you less than you would hope about how loud it will go. Doubling the power buys only three decibels — a just-noticeable step. A loudspeaker that is three decibels more sensitive achieves the same thing for nothing. And loudspeakers are not simple loads: their impedance dips as the music changes, and an amplifier that can deliver current into those dips will sound bigger and more controlled than a nominally more powerful one that cannot. That is why two “100 watt” amplifiers can sound nothing alike.

Heat, size and where it will live

Class matters for practical reasons too. Class A runs hot whether or not music is playing, so it needs open air around it and will warm a small room. Class A/B runs warm and wants a few inches of clear space above the lid — never stack another box on top. Class D barely warms at all, which is why it suits closed cabinets, shelves and small streaming amplifiers. If the equipment has to go inside furniture, say so early: it narrows the sensible choices more than any other single fact.

The small print: hybrids and other letters

Real amplifiers rarely fit one label neatly. Many Class A/B designs are set up to run in Class A for the first few watts, which is where most domestic listening actually happens. Plenty of Class D amplifiers put a conventional or even a valve stage in front of the switching output to shape the sound. And you may meet Class H, a close cousin of Class G that varies its supply rails continuously instead of switching between fixed ones. In every case the letter describes the output stage only — the power supply and the rest of the circuit do just as much to decide what you hear.

What to do with all this

Never buy a class; buy a sound. The letters explain why an amplifier behaves as it does — only listening tells you whether you’ll love it. Arrange a demonstration and hear A/B, D and G back to back through the same loudspeakers.

Found this guide useful, or got questions? We’re happy to talk it through — no hard sell, just straight answers. Contact us or call 01743 234945.

Book a Call with Duncan

Call Us Arrange a Demo